Dining Room Furniture

Products in this collection

Specification checklist

• Seating capacity and the table dimensions needed to serve it.
• Surface type and the heat, stain and scratch resistance required.
• Edge profile and how the top is joined to the base.
• Chair frame material, seat height and the load rating it must pass.
• Colour and finish reference, and whether it must match other rooms.

Hospitality and contract use

Restaurants, hotels and serviced apartments need dining furniture that survives continuous use, so heavier frames, replaceable covers and commercial-grade surfaces are available for contract orders. These projects usually order smart switches for the same building, which can be quoted and shipped together.

Matching living room and bedroom pieces for the same project are quoted on the same basis, so one container can cover several rooms in a consistent finish.

Dining and kitchen areas specified together

Open-plan projects rarely buy dining furniture on its own. The same panel, veneer and surface range is produced as kitchen cabinetry, islands and tall storage, so the dining and kitchen zones of a hotel apartment, show apartment or serviced residence can be quoted, finished and shipped as one package, together with the smart switches for the same rooms.

Surfaces and edge construction

The dining table top receives more direct wear than any other furniture surface. Start by listing what will touch it: hot plates, wet glasses, cutlery, cleaning chemicals, sunlight and repeated wiping. Solid wood offers repairable character but needs a suitable finish; veneer gives consistent grain and needs protected edges; ceramic, glass and compact surfaces behave differently under heat and impact. A marble-effect top should be described by its actual construction, not only by its appearance.

Edges are part of the performance, not a decorative detail. A veneered top needs a durable edge band or solid lip that will not lift after cleaning. A ceramic top needs a base and edge profile that distribute impact safely. Painted or lacquered edges may show chips more readily than a through-coloured material. Ask for a sample that shows the top, edge, underside and leg connection together, then test the cleaning method the end user will actually follow.

Contract durability

A restaurant, hotel or serviced apartment uses a dining set many times a day. Frames should be specified for repeated movement, not only for a showroom photograph. Check the joint between the table top and base, the chair frame connections, the seat support and any moving part such as an extension mechanism. Replaceable seat covers and touch-up finishes can extend the life of a contract set and make maintenance less disruptive.

Stability and clearances should be tested with the finished table and chairs. A pedestal base may give more legroom but needs a suitable foot design; a four-leg table needs frame bracing that does not catch the user’s knees. Confirm the seat height relative to the table apron, the number of people the shape can serve and the space needed to pull chairs out. These dimensions belong on the approval drawing.

Dining and kitchen package planning

Most open-plan projects need more than a table. The dining table, chairs, sideboard, kitchen island and tall storage can be specified as one package so that the surface, edge and hardware references match. This also makes the container plan more efficient, because cartons of different sizes can be arranged together instead of leaving unused volume. Send the kitchen layout with the dining drawing and mark any appliance or socket that the cabinetry has to accommodate.

Finish continuity does not mean every item must use the same material. A wood dining table can sit beside a lacquered sideboard and a ceramic-topped island when the colour and edge detail are coordinated. The important point is to approve the combination as a set, under the intended lighting, before the separate production orders are released. Related living room and bedroom furniture can follow the same finish schedule.

Approval points for a dining order

• Approve the table size, height, seating count and knee clearance on a drawing.
• Approve top, edge, underside and base finish on one physical sample.
• Confirm chair fabric, frame strength and the replaceable-cover arrangement.
• Check the packing method for heavy tops, glass and extending mechanisms.

Buyers can coordinate the electrical side of the same project through the smart switch range, and the furniture OEM sourcing guide explains how to compare samples, documentation and container plans.